krahmani323 Thu, 05/20/2010 - 07:59

Hello Tamilvanan,


Depending on the situation, If you have access to your Cisco router I am thinking to IP accounting to enable under Router interface configuration menu (+ related options and show commands)...


http://www.cisco.com/en/US/docs/ios/12_3/ipaddr/command/reference/ip1_i1g.html#wp1091971


The ip accounting command records the number of bytes (IP header and data) and packets  switched through the system on a source and destination IP address  basis. Only transit IP traffic is measured and only on an outbound  basis; traffic generated by the router access server or terminating in  this device is not included in the accounting statistics. Traffic coming  from a remote site and transiting through a router is also recorded.


Regards.

Karim

Leo Laohoo Thu, 05/20/2010 - 08:25

You could scan the IP address range using AngryIP or check the DHCP lease.

Actions

This Discussion