05-20-2010 10:47 AM - edited 03-14-2019 05:46 AM
Hi Guys,
My Customer have a solution IPCCX 5.0.2 with two Servers and would like know if is possible to do any configuration in the Server, to inform by e_mail, when the backup presenting a fail. Is it possible?
Thanks,
Wilson Santana
05-20-2010 03:21 PM
This can be done. Look into the Alarm Configuration to get events sent to a Syslog server that supports email notifications.
Alarm -> Syslog Server -> e-mail notification
05-21-2010 04:37 AM
Hi Anthony,
The Customer is using the version is 5.0.2 and didn´t found the option to configure this parameter. The option that I verified was:
1) Substystem>eMail
Mail Server
eMail Address
2) System>Alarm Configuration
There is not option to configure eMail
I would use the first option?
Thanks,
Wilson
05-21-2010 05:05 AM
Hi. The explanation above was too simple.
First, you need to install and configure a Syslog server.
Then you'll have to configure UCCX to send alarms to that Syslog server.
Second, you'll have to configure your Syslog server to send email messages.
Take a look at Wikipedia or Google for the term "Syslog".
G.
05-24-2010 08:18 AM
Hi Guys,
My co-worket that work with Cisco Works verify the Syslog (Cisco Works)configuration and didn´t found this option to configure.
Alarm -> Syslog Server -> e-mail notification
Thanks,
Wilson
05-24-2010 08:27 AM
That wasn't a setting, or an option I was giving you, it was an example workflow, on how this works.
Since netbakter thought my explanation was too simple...
Step 1. Configure UCCX to send Alarms to your Syslog server (System > Alarm Configuration)
Step 2. Configure your Syslog server (the free version of Kiwi supports e-mail alerts http://www.kiwisyslog.com/kiwi-syslog-server-compare-versions/)
Step 3. Enjoy
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide