I have a main site with a ASA 5520 and a remote site with an ASA 5505.
The main site has a windows 2003 server that is the DHCP server 10.25.5.15
The DHCP server has the scope 10.100.3.200-254/24 along with the options I need configured.
The remote site ASA 5505 need to be setup for DHCP relay to send the packets to the DHCP server 10.25.4.15.
Can someone assist me with the configuration?
This is what I tried but not sure if it is correct.
dhcprelay server 10.25.4.15 outside
dhcprelay setroute inside
Also when I execute the command dhcprelay enable inside it takes but I do not see a configuration after I do a show run | gre dhcprelay
Thanks very much for everyone’s assistance.