Create DHCP Pool on Cisco Aironet 1131AG

Answered Question
May 21st, 2010
User Badges:

Hi


How would I create a DCHP pool on a Cisco Aironet so that laptops would get an IP from that range when connected?


I dont want to use DHCP from our servers as these laptops are to be on a seperate network.


Just not sure what commands to use.


Thanks!

Correct Answer by Rob Huffman about 7 years 2 months ago

Hi there,


There is a nice step by step for setting up the DHCP Service on the  AP in this doc;


Configuring the Access Point to Provide DHCP Service


http://www.cisco.com/en/US/docs/wireless/access_point/12.3_8_JA/configuration/guide/s38adm.html#wp1090319




Hope this  helps!

Rob



Please support CSC Helps Haiti


https://supportforums.cisco.com/docs/DOC-8895


https://supportforums.cisco.com/docs/DOC-8727

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Rob Huffman Fri, 05/21/2010 - 06:37
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi there,


There is a nice step by step for setting up the DHCP Service on the  AP in this doc;


Configuring the Access Point to Provide DHCP Service


http://www.cisco.com/en/US/docs/wireless/access_point/12.3_8_JA/configuration/guide/s38adm.html#wp1090319




Hope this  helps!

Rob



Please support CSC Helps Haiti


https://supportforums.cisco.com/docs/DOC-8895


https://supportforums.cisco.com/docs/DOC-8727

Actions

This Discussion