I discovered due some stats that my vg224 analog gateways requests for config file from ccm, though it always failes. After taking a closer look I saw that they use as file name their hostname , e.g. vg224-20.conf.xml . Of course the cm cannot find any file called like this, because the official registration names on cm are called "SKIGW2333XXXXXX" . I do not really want to use as hostname such needles names, is there any command to force the VGs to use this SKIGW mac adress combination for config request?
For normale Voice Gateways I always have the option to adjust the hostname :-/ within CM.
Thanks and Cheers
Is it possible that you could post the config of your VG224?
You state that in CUCM the vg224 port names start with SKIGW which would indicate to me that you are attempting to use SCCP for communication between CUCM and the VG224. However, you also state that you are seeing the VG224 request a configuration file with the hostname (vg224-20.conf.xml) which would indicate to me that the VG224 is for some reason trying to communicate using MGCP. If you could post your config, we can probably get to the bottom of this.
Please rate if helpful