cisco 2821 snmp No Such Object available on this agent at this OID

Unanswered Question
May 23rd, 2010
User Badges:

Hi Sir/Miss

i am using net-snmp on CentOS. when i try to using snmpwalk to get OID "" from cisco 2821. it display No Such Object available on this agent at this OID.

i have cisco MIB "CISCO-CLASS-BASED-QOS-MIB" . it load at net-snmp. i run snmptranslate, it can successful. please look at below:

[[email protected]-logsvr mibs]# snmptranslate -m +CISCO-CLASS-BASED-QOS-MIB -IR -On cbQosConfigIndex


[[email protected]-logsvr mibs]# snmptranslate -m +CISCO-CLASS-BASED-QOS-MIB -IR -On cbQosCMPostPolicyByte

when i try to run snmpwalk , it retrun "No Such Object available on this agent at this OID" i check the mib locator in cisco website. it can support "CISCO-CLASS-BASED-QOS-MIB" . why i can't get OID?

[[email protected]-logsvr mibs]# snmpwalk -v 2c hostip -c snmpkey -m +all
CISCO-CLASS-BASED-QOS-MIB::cbQosCMPostPolicyByte = No Such Instance currently exists at this OID

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
koman.lei Sun, 05/23/2010 - 19:49
User Badges:

Hi Sir/Miss

my cisco 2821 router info:

Cisco IOS Software, 2800 Software (C2800NM-IPBASEK9-M), Version 12.4(11)T, RELEA

ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

System image file is "flash:c2800nm-ipbasek9-mz.124-11.T.bin"

router cbwfq config:

  Policy Map QoS
    Class Precedence-5
      Strict Priority
      Bandwidth 1024 (kbps) Burst 25600 (Bytes)
    Class Precedence-4
      Strict Priority
      Bandwidth 192 (kbps) Burst 4800 (Bytes)
    Class class-default
      Flow based Fair Queueing
      Bandwidth 0 (kbps) Max Threshold 64 (packets)

interface Serial0/0/0:0
description Unframe E1 IPLC to HK
bandwidth 2048
ip address x.x.x.x
no ip unreachables
ip route-cache flow
load-interval 30
max-reserved-bandwidth 99
service-policy output QoS



This Discussion