CME - direct incoming call from PSTN

Unanswered Question
May 24th, 2010
User Badges:

Hi Guys,


Is there any way to direct specific incoming call from PSTN to a specific dial-peer range number on CME using COR? - 3 CMEs, only 1 cme connected to PSTN.


for example, public phone number 7771234 that originate from PSTN only allow to ring dial-peer range 7771000-7771005 on CME-A then public phone number 7771235, only allow to ring dial-peer range 7771006-7771010 on CME-C.


please advice


Thanks in advance

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paolo bevilacqua Mon, 05/24/2010 - 02:02
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Do you need to direct on the basis of phone line, or calling number ?

vip80y_cisco Mon, 05/24/2010 - 03:43
User Badges:

Hi, thanks for your reply...

I need to direct on the basis of calling number


thanks,

terrence

vip80y_cisco Mon, 05/24/2010 - 04:06
User Badges:

Hi,


Thanks for the links.

Do you have any documentation with COR?

Restrict outgoing call seems to be easier than incoming...


Thanks,

Terrence

paolo bevilacqua Mon, 05/24/2010 - 04:22
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

I would use number transaltion in your case actually.

Actions

This Discussion