05-24-2010 12:03 AM - edited 03-15-2019 10:54 PM
Hi Guys,
Is there any way to direct specific incoming call from PSTN to a specific dial-peer range number on CME using COR? - 3 CMEs, only 1 cme connected to PSTN.
for example, public phone number 7771234 that originate from PSTN only allow to ring dial-peer range 7771000-7771005 on CME-A then public phone number 7771235, only allow to ring dial-peer range 7771006-7771010 on CME-C.
please advice
Thanks in advance
05-24-2010 02:02 AM
Do you need to direct on the basis of phone line, or calling number ?
05-24-2010 03:43 AM
Hi, thanks for your reply...
I need to direct on the basis of calling number
thanks,
terrence
05-24-2010 03:52 AM
Diffrent details but same principle:
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801c0a88.shtml
On the DP matrching answer-address, translate called number to desired destination.
05-24-2010 04:06 AM
Hi,
Thanks for the links.
Do you have any documentation with COR?
Restrict outgoing call seems to be easier than incoming...
Thanks,
Terrence
05-24-2010 04:22 AM
I would use number transaltion in your case actually.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: