CUCM 6/7 SIP Trunk utilization via SNMP

Unanswered Question
May 24th, 2010

Hello All,

I would like to monitor the number of "CallsInProgress" for any given SIP Trunk on my CUCM using SNMP. The RTMT makes this information available under performance->Cisco SIP->CallsInProgress, but I am having no luck finding the correct OID for the SIP Trunk utilization.

What I found is the details of SIP trunks:

"ccmSIPDeviceInfo"                                                             ""

"ccmSIPTableEntries"                                                          ""

"ccmSIPDeviceTable"                                                           ""

"ccmSIPDeviceEntry"                                                           ""

"ccmSIPDevIndex"                                                                ""

"ccmSIPDevName"                                                               ""

"ccmSIPDevProductTypeIndex"                                      ""

"ccmSIPDevDescription"                                                    ""

"ccmSIPDevInetAddressType"                                        ""

"ccmSIPDevInetAddress"                                                  ""

"ccmSIPInTransportProtocolType"                                 ""

"ccmSIPInPortNumber"                                                      ""

"ccmSIPOutTransportProtocolType"                             ""

"ccmSIPOutPortNumber"                                                  ""

"ccmSIPDevInetAddressIPv4"                                         ""

"ccmSIPDevInetAddressIPv6"                                         ""

"ccmSIPDeviceInfoGroup"                                                ""

"ccmSIPDeviceInfoGroupRev1"                                      ""

However there are no any counters for calls made available.

I know RTMT and Ops Manager can do it and I suspect it's not a straight forward. Any ideas?



I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Marcel Ammann Wed, 03/09/2011 - 04:54

Hello Vlad,

this post is a little bit older - but you could now monitor the utilization of the SIP Trunk with the new Operations Manager 8.5.

Kind regards,

Marcel Ammann

P.S.: Please rate helpful posts


This Discussion

Related Content