Unable to detect CME version. error in Cisco CP2.2 preventing QoS configuration

Unanswered Question
May 24th, 2010

Hi there,

I have an 877 running IOS 12.4(15)T10.   I'm connecting to it using CP 2.2 so that I can attempt to configure QoS for VOIP.

I receive the following status information when discovering the device:

IOS version is 12.4(15)T10.

Hardware platform is 877.

Unable to detect CME version. Voice features will not be available.

IOS voice functionality is not available.

Video feature ready.

IOS security functionality is available.

IOS security functionality is available.

In CP under Router -> Advanced Router the QoS option is grayed out.

The IOS image is c870-advsecurityk9-mx.124015.T10.bin

Am I missing something?


I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Paolo Bevilacqua Mon, 05/24/2010 - 01:52

CP is correct, there is no CME on that router.

However, CP is also inadequate for most cases, so just configure using CLI .


This Discussion