ACS 1113 Access to Command Line

Unanswered Question
May 24th, 2010
User Badges:

I have a 1113 ACS but I can't remember what type of adapter/cable combo I need to get to the command prompt.  I tried the previous solution (standard serial to RJ45 Cisco cable-Terminal adapter) but it didn't work.  I have the RJ45 to RJ45 Cisco Roll over cable that came with the ACS but I thought that you had to use one terminal (DTE) adapter and one null modem (DCE) adapter to get the login prompt.  The problem is I have no null modem adapters!!!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Chetan Kumar Ress Mon, 05/24/2010 - 07:58
User Badges:
  • Silver, 250 points or more

Dear Jason

To configure the ACS 1113 you can use Console Cable.

And Open the ACS 1113 server with Hyper Terminal  using below setting:

Baud = 115200

Databits = 8

Parity = N

Stops = 1

Flow control = None

Terminal emulation type = ANSI

and for more detail please find the below link.


This Discussion