ACS 1113 Access to Command Line

jason.knight-02 · ‎05-24-2010

I have a 1113 ACS but I can't remember what type of adapter/cable combo I need to get to the command prompt. I tried the previous solution (standard serial to RJ45 Cisco cable-Terminal adapter) but it didn't work. I have the RJ45 to RJ45 Cisco Roll over cable that came with the ACS but I thought that you had to use one terminal (DTE) adapter and one null modem (DCE) adapter to get the login prompt. The problem is I have no null modem adapters!!!

Chetan Kumar Ress · ‎05-24-2010

Dear Jason

To configure the ACS 1113 you can use Console Cable.

And Open the ACS 1113 server with Hyper Terminal using below setting:

Baud = 115200

Databits = 8

Parity = N

Stops = 1

Flow control = None

Terminal emulation type = ANSI

and for more detail please find the below link.

https://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.1/installation/guide/solution_engine/instalap.html