We purchased a few SFE1000P switches to use in conference rooms ( because they are fanless ) and need to configure them to participate in our VLAN enviroment. I am running into a problem with connecting to the switches after I configure the VLAN trunk ports.
When I configure the port on the 3750 to "trunk mode" I cannot reach the management IP of the SFE switch.
The backbone switch is a C3750G running IOS 12.2(52)SE. and the port used to connect to the SFE1000P is configured as follows:
description 070B Misc.
switchport access vlan 4
switchport trunk encapsulation dot1q
switchport mode trunk
Thanks for the help,