Internet access over existing mpls vpn

Unanswered Question
Giuseppe Larosa Tue, 05/25/2010 - 07:38
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Vicky,

one VRF site needs to be connected to the internet via a separate link (easier way to do this)

the CE of that site with internet access has to advertise route to PE over the eBGP sessions. PE nodes will propagate this within the MPLS L3 VPN to all sites.

device that connects to the internet needs routes for all IP subnets of all sites and also NAT rules to translate all that IP addresses.

Doing that on the PE using a single link requires some work on the PE side to make the VRF natted ip adddresses to communicate with global routing table.

Hope to help



Its clear to me so far.can you explain how to configure Internet access over same existing mpls connectivity(single physical link).I am looking for Internet connection over my existing MPLS connectivity to my service provider with out going for dedicated internet conection anywhere my branch.Please explain the implementation and config required



This Discussion