our customer uses C3745 and C3825 machines with 2 E1s and 2 boards with 30 Mica-Modems per board.
We use these routers for dialing out and connect with remote modems.
We want to define a binding between up modems of each board with E1 controller.
i.e For router C3745 the bind would be
Board 1 -> e1 3/0 --> Interface Serial 3/0:15
Board 2 -> e1 3/1 -> Interface Serial 3/1:15
We tested dialer profiles and rotarys, also the rotary cmd on the line,
but for dialout the router just takes the next available interface it wants.
Is there a possibility to get this job fixed ?
Thanks for help in advance.