05-25-2010 09:40 PM - edited 03-19-2019 12:59 AM
Hi all,
I am looking into deploying a Unity Connection cluster with the Publisher in Ca and the Subscriber in Tx. The Ca location and the Tx location are connected over a full 45MB DS3 connection and the round-trip latency is about under 40ms. There will be 48 voice mail ports total on each server.
I am trying to find out the minimum bandwidth requirement for replication and intra-cluster communication traffic between the Pub and Sub.
Has anyone deploy anything like this for Unity Connection ? Is this a supported deployment ? I appreciate any inputs / suggestions !!!! Thanks in advance !!!
D.
Solved! Go to Solution.
05-25-2010 09:55 PM
When Unity Connectio
n cluster servers are deployed in separate buildings, the following requirements/best practices apply:
Available here: http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/requirements/7xcucsysreqs.html#wp151620
HTH.
Regards,
Bill
Please remember to rate helpful posts.
Please remember to rate helpful responses and identify
05-25-2010 09:55 PM
When Unity Connectio
n cluster servers are deployed in separate buildings, the following requirements/best practices apply:
Available here: http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/requirements/7xcucsysreqs.html#wp151620
HTH.
Regards,
Bill
Please remember to rate helpful posts.
Please remember to rate helpful responses and identify
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: