To know if the interface up, line protocol up with SNMP MIB?

Unanswered Question
May 26th, 2010
User Badges:


We can know whatever if the interface admin down or admin up on ifADminStatus.
and Whatever if operation or not, we can know with ifOperStatus.

for more detail, on the status interface admin up, Can we know the status interface up, line protocol up with SNMP mib?

Thanks in advance

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Ganesh Hariharan Wed, 05/26/2010 - 01:46
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Member's Choice, February 2016

We can know whatever if the interface admin down or admin up on ifADminStatus.
and Whatever if operation or not, we can know with ifOperStatus.

for more detail, on the status interface admin up, Can we know the status interface up, line protocol up with SNMP mib?

Thanks in advance


Hi,


Check out the  below link :


http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a05.shtml


Configure "snmp-server enable traps snmp linkup" & ""snmp-server enable traps snmp linkdown".


Hope to Help.


Ganesh.H


Remember to rate the helpful post

Actions

This Discussion