Hello Matt,
6 KW power supplies have different AC inputs and use different cables
see
http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9402/ps9512/Data_Sheet_C78-437761.html
6KW
International Electrotechnical Commission (IEC) 320-C19
7,5 KW
IEC 60309 for INT
NEMA L6-30 for US
there are also pictures showing clearly the AC inputs have different shapes
We have recently installed two
here is the sample of sh environment power
sh environment power
Power Supply:
Voltage: 50 Volts
Power Actual Total
Supply Model Output Capacity Status
(Watts ) (Watts )
------- ------------------- ----------- ----------- --------------
1 N7K-AC-6.0KW 512 W 6000 W Ok
2 N7K-AC-6.0KW 469 W 6000 W Ok
3 N7K-AC-6.0KW 579 W 6000 W Ok
Actual Power
Module Model Draw Allocated Status
(Watts ) (Watts )
------- ------------------- ----------- ----------- --------------
1 N7K-M132XP-12 N/A 750 W Powered-Up
5 N7K-SUP1 N/A 210 W Powered-Up
6 N7K-SUP1 N/A 210 W Powered-Up
10 N7K-M132XP-12 N/A 750 W Powered-Up
Xb1 N7K-C7010-FAB-1 N/A 60 W Powered-Up
Xb2 N7K-C7010-FAB-1 N/A 60 W Powered-Up
Xb3 N7K-C7010-FAB-1 N/A 60 W Powered-Up
Xb4 N7K-C7010-FAB-1 N/A 60 W Powered-Up
Xb5 N7K-C7010-FAB-1 N/A 60 W Powered-Up
fan1 N7K-C7010-FAN-S N/A 720 W Powered-Up
fan2 N7K-C7010-FAN-S N/A 720 W Powered-Up
fan3 N7K-C7010-FAN-F N/A 120 W Powered-Up
fan4 N7K-C7010-FAN-F N/A 120 W Powered-Up
N/A - Per module power not available
Power Usage Summary:
--------------------
Power Supply redundancy mode (configured) PS-Redundant
Power Supply redundancy mode (operational) PS-Redundant
Total Power Capacity (based on configured mode) 12000 W
Total Power of all Inputs (cumulative) 18000 W
Total Power Output (actual draw) 1560 W
Total Power Allocated (budget) 3900 W
Total Power Available for additional modules 8100 W
Hope to help
Giuseppe
