Hi Guys,
recently i have created a remote access on my IOS router acting as VPN gateway, this router has multiple IPsec tunnels..I have users connected through IPhone/data cards etc to connect through remote access tunnel.
When a user gets connected a static route is placed on the gateway for that IP, when a VPN is disconnected the static route is not removed. Below is a raw log of my routing table for remote access users
S 10.224.200.32/32 [1/0] via 192.168.15.27
S 10.224.200.33/32 [1/0] via 192.168.15.29
S 10.224.200.3/32 [1/0] via 192.168.15.6
S 10.224.200.9/32 [1/0] via 192.168.15.10
S 10.224.200.15/32 [1/0] via 192.168.15.12
S 10.224.200.22/32 [1/0] via 192.168.15.16
S 10.224.200.23/32 [1/0] via 192.168.15.17
S 10.224.200.26/32 [1/0] via 192.168.15.22
S 10.224.200.30/32 [1/0] via 192.168.15.25
S 10.224.200.31/32 [1/0] via 192.168.15.26
S 10.224.200.28/32 [1/0] via 192.168.15.23
S 10.224.200.29/32 [1/0] via 192.168.15.24
Out of these static routes only 1 of them is active other VPNs are terminated, could you please let me know if anything special needs to be done.
Cheers
AP