Cisco ASR1002 Chassis,4 built-in GE, Dual P/S,4GB DRAM support 1000BASE-T SFP (NEBS 3 ESD) or not?

Answered Question
May 26th, 2010
User Badges:

Dear All,


I want to confirm with you that i want to buy modul 1000BASE-T SFP (NEBS 3 ESD) (P/N: SFP-GE-T) 4 unite for install to Cisco router ASR 1002

but i don't know Cisco ASR 1002 (P/N: ASR1002) can support module SFP-GE-T or not .

Could you help me on this?


Best Regards,

Rechard

Correct Answer by Leo Laohoo about 6 years 11 months ago

SFP-GE-T is supported on the ASR1002 with firmware XE 2.1.


http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.html#wp131775


Don't forget to rate useful posts.  Thanks.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Leo Laohoo Wed, 05/26/2010 - 21:29
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

SFP-GE-T is supported on the ASR1002 with firmware XE 2.1.


http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.html#wp131775


Don't forget to rate useful posts.  Thanks.

Leo Laohoo Thu, 05/27/2010 - 15:44
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Thanks for the rating.

Actions

This Discussion