cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1924
Views
5
Helpful
1
Replies

c2960: strange working for archive feature

YuryKozlov
Level 1
Level 1

Hello.

I setup archiving on

cisco WS-C2960 ver 122-50.SE1

archive
path ftp://login:pass@172.20.1.1/backup/cc-net1-sw1_
write-memory
time-period 1440

Command 'archive config' is working and the file with config

is created.

9027 May 26 10:17 cc-net1-sw1_May-26-10-17-16-0

Today new file was created automatically

193 May 27 09:19 cc-net1-sw1_May-27-09-19-16-1

But it is very small (193 bytes long) and his contents is empty.

!
! Last configuration change at 10:17:14 MSD Wed May 26 2010 by admin
! NVRAM config last updated at 10:17:14 MSD Wed May 26 2010 by admin
!
boot-start-marker
boot-end-marker
!
!
!
!
!
!
end

Why? How to fix it?

WBR,

Yuri Kozlov

1 Accepted Solution

Accepted Solutions

Joe Clarke
Cisco Employee
Cisco Employee

This is due to CSCtf51974.  It will be fixed in 12.2(55)SE.  As a workaround, you could schedule an archive to happen using kron.  For example, to auto-archive the config every minute:

kron occurrence archive-config in 1:0 recurring
policy-list archive-config
!
kron policy-list archive-config
cli archive config

View solution in original post

1 Reply 1

Joe Clarke
Cisco Employee
Cisco Employee

This is due to CSCtf51974.  It will be fixed in 12.2(55)SE.  As a workaround, you could schedule an archive to happen using kron.  For example, to auto-archive the config every minute:

kron occurrence archive-config in 1:0 recurring
policy-list archive-config
!
kron policy-list archive-config
cli archive config
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: