AP 1200 to LWAPP

Unanswered Question
May 27th, 2010
User Badges:

HI All,


We have the following AP's models


air-ap1220a-a-k9

air-ap1230a-a-k9


However, cannot appear to convert these to LWAPPs. Can anyone shed light if these models are supported cause we're having trouble determining this.


Regards,


Mark

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Leo Laohoo Thu, 05/27/2010 - 15:17
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

You need to use the LWAPP conversion tool and the AP needs to be in the same subnet (and reachable) to the WLC.  As of the latest Release Notes, 1220A/B are still supported.


Please don't forget to rate useful posts.  Thanks.

George Stefanick Thu, 05/27/2010 - 18:48
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Best Publication, October 2015

Humm... are you sure ... I dont think B only radios are supported ...

Leo Laohoo Thu, 05/27/2010 - 18:57
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

I have no idea how accurate this is but 1220A and 1220B is first supported on 3.1.59.24 and there's not mention of last supported firmware. 


Software Release Support for Access Points
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn6_0_196.html#wp610751

Actions

This Discussion