hello i found this post and would like any help with it anyone can give.
I have been trying to solve this packet tracer lab TroubleShooting Enterprise Networks 1, score 68%.
Below are the modifications that score:
12% DHCP enabled on PC1
7% config S2 as VTP client
6% add vlan 30 to S3
6% add vlan 11 to S3
7% set no passive-interface S0/0/0 on Router 1
7% set no passive-interface S0/0/1 on Router 1
6% set no passive-interface fa0/1 on Router 1
6% set no passive-int on Fa0/0 no router 1
6% assign port S3 F0/2 to vlan 30
0% change vtp domain on S3 to CCNA_troubleshooting
6% add vlan 11 to S3 fa0/1 trunk
There is no check Items, I can't find anything else to fix.
Most appreciate if anyone could help so that I can complete this lab
here is a Link to the lab TroubleShooting Enterprise Networks 1