05-28-2010 09:21 AM - edited 03-06-2019 11:19 AM
I have not seen this before and was wondering what it means. When I run the command
show etherchannel 52 sum
I see a Po52 and a Po52B
What does the B means?
This is happening on another one as well except it says A and not B
6509-VSS#show etherchannel 52 sum
Flags: D - down P - bundled in port-channel
I - stand-alone s - suspended
H - Hot-standby (LACP only)
R - Layer3 S - Layer2
U - in use N - not in use, no aggregation
f - failed to allocate aggregator
M - not in use, no aggregation due to minimum links not met
m - not in use, port not aggregated due to minimum links not met
u - unsuitable for bundling
d - default port
w - waiting to be aggregated
Number of channel-groups in use: 80
Number of aggregators: 83
Group Port-channel Protocol Ports
------+-------------+-----------+-----------------------------------------------
52 Po52(SU) LACP Gi2/2/30(P)
52 Po52B(SU) LACP Gi1/2/40(P)
Last applied Hash Distribution Algorithm: Fixed
Mike
05-28-2010 10:04 AM
In the output of the show etherchannel summary command, the following conventions apply:
•In the column that displays the protocol that is used for the channel, if the channel mode is ON, a hyphen (-) is displayed.
•For LACP, multiple aggregators are supported. For example, if two different bundles are created, Po1 indicates the primary aggregator, and Po1A and Po1B indicates the secondary aggregators.
http://www.cisco.com/en/US/partner/docs/ios/interface/command/reference/ir_s3.html#wp1019580 -- and scroll down just a little bit...
Thanks,
TJM
05-28-2010 10:32 AM
Thanks....but for some reason I cannot get to that document....what is the name of the doc I can search on it.
Mike
05-28-2010 10:36 AM
The name is:
Cisco IOS Interface and Hardware Component Command Reference
See if you can find it under that, for me it's under partner docs.
Thanks,
TJM
05-28-2010 10:36 AM
Never mind I just changed partner to customer
Mike
05-28-2010 10:47 AM
That helped alot thanks....
Now another question.....how can I not have them have multiple aggregators? I have the same exact setup on another server and I do not have multiple aggregators. What could cause multiple aggregators .
ike
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: