PRI rolling to different UCCX Directory Numbers

Answered Question

I have a Full PRI installed on location.  The T1 and ISDN circuits are working fine.  If I add a "connection plar opx" to the directory number of the UCCX application, dialing the associated PRI number rings to said application on the UCCX server.  I would like to add a number of UCCX applications that call over the same PRI but to separate called numbers.  I thought if I removed the "connection plar opx" and added a translation-profile which translated the inbound called number to the directory number associated with the UCCX application, it would work, however when I dial the number it rings to a dial tone.  I debugged the translations and it appears that the translation is taking place, however the call is not being routed to the UCCX server after the translation.  Does anyone have any better way to do this or idea how to make this work.


Thanks,


John

Correct Answer by Brandon Buffin about 6 years 11 months ago

You may have an inbound dial peer for all incoming calls such as:


dial-peer voice 1 pots

incoming called-number .


Brandon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.5 (2 ratings)
Loading.
Brandon Buffin Fri, 05/28/2010 - 13:46
User Badges:
  • Purple, 4500 points or more

John,

     Do you have "direct-inward-dial" on your inbound dial peer?


Brandon

Correct Answer
Brandon Buffin Fri, 05/28/2010 - 13:57
User Badges:
  • Purple, 4500 points or more

You may have an inbound dial peer for all incoming calls such as:


dial-peer voice 1 pots

incoming called-number .


Brandon

Actions

This Discussion