H-REAP experiences

Unanswered Question

Hello everybody!

For budget reasons, I am planning to deploy a Wireless solution over the WAN using H-REAP, my topology will be:

* WLC 5508-50 in the main Site

* 03 Remotes Sites : (5) AP 1141 each/site

* WAN Remote:      MPLS-VPN Bw:1024,  RTT< 20ms (From the main site)

I concern how it would be the performance, so

Have  Somebody had some similar experience with H-REAP? or Any other H-REAP deployment with more than 3 AP in the remote Sites ?

Thanks for any comment.

José Luis

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Mazzola68 Mon, 05/31/2010 - 06:09

Hi with a latest Release 6.0 in a 5508 are supported 20 H-reap Group with a 25 AP without problem.

I have tested a solution with a WLC in a remote site and work OK.


Mazzola68 Mon, 05/31/2010 - 06:13


In a latest Release 6.0 a WLC 5508 support 20 H-Reap group with 25 AP whitout problem

I have tested it with a WLC installed in remote site and work OK.



Scott Fella Mon, 05/31/2010 - 13:54

You should be fine with your setup.  I have multiple clients running H-REAP.  One client with 25 sites and from 2-5 1250's in H-REAP.  Also have schools with remothe sites 30+ H-REAP.  You ping times are reasonable for this type of install.



This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode