cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
918
Views
0
Helpful
4
Replies

H-REAP experiences

jvelasquez
Level 1
Level 1

Hello everybody!

For budget reasons, I am planning to deploy a Wireless solution over the WAN using H-REAP, my topology will be:

* WLC 5508-50 in the main Site

* 03 Remotes Sites : (5) AP 1141 each/site

* WAN Remote:      MPLS-VPN Bw:1024,  RTT< 20ms (From the main site)

I concern how it would be the performance, so

Have  Somebody had some similar experience with H-REAP? or Any other H-REAP deployment with more than 3 AP in the remote Sites ?

Thanks for any comment.

José Luis

4 Replies 4

Mazzola68
Level 1
Level 1

Hi with a latest Release 6.0 in a 5508 are supported 20 H-reap Group with a 25 AP without problem.

I have tested a solution with a WLC in a remote site and work OK.

Bye

Mazzola68
Level 1
Level 1

Hi.

In a latest Release 6.0 a WLC 5508 support 20 H-Reap group with 25 AP whitout problem

I have tested it with a WLC installed in remote site and work OK.

Bye

HDgio

Hi HDgio,

How many AP do you have in your remote site? and what is the BW ?

thanks.

José Luis

You should be fine with your setup.  I have multiple clients running H-REAP.  One client with 25 sites and from 2-5 1250's in H-REAP.  Also have schools with remothe sites 30+ H-REAP.  You ping times are reasonable for this type of install.

Scott

-Scott
*** Please rate helpful posts ***
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: