05-31-2010 05:53 AM - edited 03-06-2019 11:20 AM
Hi
I have a 3825 router runnning code:c3825-spservicesk9-mz.124-15.T9.bin
I am facing a starange problem.
my problem is when i configure my gi 0/0 or gi 0/1 for testing with ip ip address 220.225.33.217 255.255.255.252 , i cant able to ping my self ip
but if i chnage the ip to some other range like "ip address 202.225.33.217 255.255.255.252" . i can able to ping the self interface ip which is 202.225.33.217 . how srtange is it a ios bug
05-31-2010 06:56 AM
Hi,
I assume you're connecting the router to the Internet directly.
Can you connect a computer (instead than the router) and assign that same IP to the computer and see if you can PING the computer itself?
Federico.
05-31-2010 08:13 AM
I found a culprit the problem is one user ip is statically natted to the WAN interface ip using ip nat inside source < IP_host > interfcace gi0/1( WAn interface)
but after i have removed the entry i can ping the self IP of the WAN interface.
Why this is so i cannt understand.
05-31-2010 08:18 AM
If you had a user statically NATed to the WAN IP, it means that when you attempt to PING the WAN IP, traffic will be sent to the inside user.
If the inside user does not respond to the PING, then you won't get a response.
If you need a static NAT, have a different IP for the WAN IP (or use static PAT)
Federico.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide