05-31-2010 02:09 PM
Hi,
We have two 6513 switchs (6500-1 and 6500-2), each has a management IP@ but CS discovers both by managment IP@ and other ip@ which are defined on 6500 switch:
on dcr :
discover by admin Vlan :
6500-1 xx.xx.100.10
6500-2 xx.xx.150.10
and with other ip :
xx.xx.200.98 xx.xx.200.98 for 6500-1
xx.xx.200.99 xx.xx.200.99 for 6500-2
Dns configuration:
6500-1 has xx.xx.100.10 and xx.xx.200.98 defined
6500-2 has xx.xx.150.10 and xx.xx.200.99 defined
Acs :
@ip are defined in acs.
You will find discovery configuration.
Many thanks, Elisabeth
05-31-2010 07:17 PM
In order to diagnose this, you will need to provide the show run from both switches. You will also need to provide the output of an SNMP Walk of the ipAddrTable from both switches.
06-01-2010 03:20 AM
Hi,
For security reasons, I can't forward all information from show run, what information do you need ?
Many thanks, Elisabeth
06-01-2010 08:53 AM
If you cannot post the information to the forum, open a TAC service request and provide the configs and ipAddrTable SNMP Walk output.
06-01-2010 11:57 AM
I will open a case tomorow.
Many thanks, Elisabeth
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: