05-31-2010 04:42 PM - edited 03-06-2019 11:21 AM
I have a query about Cisco WS-C3560G-24TS switch it has 4 SFP ports and I have for fiber uplinks so I can utilize all ports at a time, please confirm ASAP.
Thanks,
Majid
Solved! Go to Solution.
05-31-2010 04:49 PM
Yes you can use all 4 .They are like any other port except you have
to use sfp adaptors .
05-31-2010 05:11 PM
Do you have Cisco document for this, kindly send me the link.
We may not have the links for this but trust Glen. The only model of L2 switches that has dual-personality is the 24-port 2960. With this model you can either use the SFP or copper. All other models you can use-em-all.05-31-2010 11:59 PM
Do you have Cisco document for this, kindly send me the link.
Thanks,
Majid
Hi Majid,
Check out the below link for SFP module supported in 3560 switches
http://www.cisco.com/en/US/products/hw/modules/ps4999/products_tech_note09186a00807a30d6.shtml
Hope to Help !!
Ganesh.H
Remember to rate the helpful post
05-31-2010 04:49 PM
Yes you can use all 4 .They are like any other port except you have
to use sfp adaptors .
05-31-2010 05:06 PM
Do you have Cisco document for this, kindly send me the link.
Thanks,
Majid
05-31-2010 05:11 PM
Do you have Cisco document for this, kindly send me the link.
We may not have the links for this but trust Glen. The only model of L2 switches that has dual-personality is the 24-port 2960. With this model you can either use the SFP or copper. All other models you can use-em-all.05-31-2010 11:59 PM
Do you have Cisco document for this, kindly send me the link.
Thanks,
Majid
Hi Majid,
Check out the below link for SFP module supported in 3560 switches
http://www.cisco.com/en/US/products/hw/modules/ps4999/products_tech_note09186a00807a30d6.shtml
Hope to Help !!
Ganesh.H
Remember to rate the helpful post
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: