×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

I have five Axis 212 PTZ cameras installed on VSMS/VSOM 6.2.1/4.2.1 and the PTZ controls do not work correctly in VSOM. The zoom works but the PAN does not. Any ideas?

Answered Question
May 31st, 2010
User Badges:

I have five Axis 212 PTZ cameras installed on VSMS/VSOM 6.2.1/4.2.1 and the PTZ controls do not work correctly in VSOM. The zoom works but the PAN does not. Any ideas?

Correct Answer by ajuarez@sentinel.com about 7 years 2 months ago

With the Axis 212 PTZ cameras you need to zoom in first then, you will

be able to pan thr camera.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
ajuarez@sentinel.com Tue, 06/01/2010 - 08:03
User Badges:

With the Axis 212 PTZ cameras you need to zoom in first then, you will

be able to pan thr camera.

mcwalter Tue, 06/08/2010 - 10:03
User Badges:

What firmware version are you running on the Axis cameras? I have a different problem when running 4.40 and 4.49 but I was curious about your firmware version.

Actions

This Discussion