VG224 integration with CUCM 8

Unanswered Question
Jun 2nd, 2010
User Badges:

Hi All,


I am new to Cisco IPT.


I would like to integrate Vg224 with CUCM8. The VG224 will be used to connect FAX & Analog Phones.


Could you please let me know which protocol (H323/MGCP/SSCp) should I use to integrate with CUCM.


Regards,


Nirmal

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jonathan Schulenberg Wed, 06/02/2010 - 03:14
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

SCCP will provide the best line-side feature support.

Nirmal Paria Wed, 06/02/2010 - 03:18
User Badges:

Thanks for your quick suggestion. I have a small query on it.


Will FAX work fine with SCCP configuration mode ?


Regards,


Nirmal

Jonathan Schulenberg Wed, 06/02/2010 - 03:26
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

Yes if properly configured; Fax relay, either Cisco-proprietary or T.38 must be supported by both the VG224 IOS and PSTN gateway. It also must be configured appropriatly.


The Cisco IOS Fax, Modem, and Text Support over  IP Configuration Guide, Release 12.4T is a good place to start.

Actions

This Discussion