FXOs with celular stations

Unanswered Question
Jun 2nd, 2010
User Badges:

I have a issue which I´m not able to identify yet.

- PSTN: E1-CAS-R2, works fine.

- PSTN: 2 x FXO for celular stations. Outbound call works fine. Inbounds calls doesnt work well at all.

  

Looks like a problem with the DTMF. After the AA shows the options, the AA do not accept any input keystroke.

the show run:

....

!

trunk group ALL_FXO

hunt-scheme longest-idle both

!

!

voice-port 0/0/0

trunk-group ALL_FXO 1

cptone CO

connection plar 8100

!

voice-port 0/0/1

trunk-group ALL_FXO 1

cptone CO

connection plar 8100

!

!

dial-peer voice 1 pots

translation-profile incoming PSTN-IN

incoming called-number .

direct-inward-dial

!

!

dial-peer voice 8100 voip

description ** CUE AA number **

destination-pattern 8100

b2bua

session protocol sipv2

session target ipv4:172.26.1.8

dtmf-relay sip-notify

codec g711ulaw

no vad

!

Show ver

Cisco IOS Software, 2800 Software (C2800NM-SPSERVICESK9-M), Version 12.4(24)T1, RELEASE SOFTWARE (fc3)

I need some ideas.

Thanks.

RJB

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion