frame-relay

Answered Question
Jun 2nd, 2010

R1-----R5-----R3,R5 is frame-relay switch ,. R1 can not communite with R3, what is the wrong ,please ?

R5

interface Serial1/0    ###### to R1
no ip address
encapsulation frame-relay
serial restart-delay 0
frame-relay lmi-type cisco
frame-relay intf-type dce
frame-relay route 231 interface Serial1/1 233
!
interface Serial1/1     #### to R3
no ip address
encapsulation frame-relay
serial restart-delay 0
frame-relay lmi-type cisco
frame-relay intf-type dce
frame-relay route 233 interface Serial1/0 231

R1

interface Serial1/0
ip address 1.1.1.1 255.255.255.0
encapsulation frame-relay
serial restart-delay 0

R3

interface Serial1/1
ip address 1.1.1.2 255.255.255.0
encapsulation frame-relay
serial restart-delay 0

I have this problem too.
0 votes
Correct Answer by Giuseppe Larosa about 4 years 10 months ago

Hello Zhiwei,

on DTE routers try to use point-to-point subinterfaces and to use frame-relay interface-dlci to see if the issue is related to inverse-ARP

Hope to help

Giuseppe

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Correct Answer
Giuseppe Larosa Wed, 06/02/2010 - 23:26

Hello Zhiwei,

on DTE routers try to use point-to-point subinterfaces and to use frame-relay interface-dlci to see if the issue is related to inverse-ARP

Hope to help

Giuseppe

Actions

Login or Register to take actions

This Discussion

Posted June 2, 2010 at 10:26 PM
Stats:
Replies:1 Overall Rating:5
Views:529 Votes:0
Shares:0
Tags: No tags.
 

Discussions Leaderboard

Rank Username Points
1
Jon Marshall
16,571
2
Reza Sharifi
9,299
3
Giuseppe Larosa
8,202
4
Peter Paluch
7,599
5
Leo Laohoo
7,591
Rank Username Points
Jon Marshall
537
Reza Sharifi
116
Joseph W. Doherty
114
Peter Paluch
71
Bilal Nawaz
64