Hi John,

I am trying to figure out if we are having an issue or not. I have a customer complaining of latency to an app.  I can see the sporadically high ping times and hops in a traceroute though those can be false positive.  All the circuits are running clean and nothing is being dropped.  The only thing I saw that seemed odd is the "unassigned" fragments in the output in the post. I dont know if I should be concerned about them or not.  I searched for a while on google and could not find out anything one way or another.

Thanks

Lynne

Can you post the config of that interface and the interface that's bonded to it? Take out public addressing and things....

John

interface Multilink9
description to -
ip vrf forwarding XX
ip address x.x.x.x 255.255.255.252
ip flow ingress
no cdp enable
ppp multilink
no ppp multilink fragmentation
multilink-group 9
no clns route-cache
end

sh run int Se2/0/18:1
Building configuration...

Current configuration : 235 bytes
!
interface Serial2/0/18:1
description T-1 to -
bandwidth 1544
no ip address
ip flow ingress
encapsulation ppp
ppp multilink
multilink-group 9
no clns route-cache
end

sh run int Se2/0/17:1
Building configuration...

Current configuration : 235 bytes
!
interface Serial2/0/17:1
description T-1 -
bandwidth 1544
no ip address
ip flow ingress
encapsulation ppp
ppp multilink
multilink-group 9
no clns route-cache
end

sh run int Se2/0/16:1
Building configuration...

Current configuration : 235 bytes
!
interface Serial2/0/16:1
description T-1 to-
bandwidth 1544
no ip address
ip flow ingress
encapsulation ppp
ppp multilink
multilink-group 9
no clns route-cache
end

sh run int Se2/0/4:1
Building configuration...

Current configuration : 222 bytes
!
interface Serial2/0/4:1
description T-1 to
bandwidth 1544
no ip address
ip flow ingress
encapsulation ppp
ppp multilink
multilink-group 9
no clns route-cache
end

here you go.