Replacing NM-HDV2 card by VWIC2-1MFT-T1/E1

Unanswered Question

Hi,


My customer is planning to replace an existing NM-HDV2-1T1/E1 card (connecting a TDM PRI trunk from PBX) by a VWIC2-1MFT-T1/E1 card.


I just want to know if a standalone VWIC card can support all the voice functionality of a NM-HDV-T1/E1 card including E1 PRI signalling.


There are enough DSPs onboard the Cisco 2821 router.


Many thanks for your time.


Regards

NS

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Rob Huffman Thu, 06/03/2010 - 10:21
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi NS,


Yes, the VWIC2 - 1MFT -T1/E1 card can fully support E1

PRI signalling We use 4 of these cards to support a similar

setup.


Cisco 2nd Generation 1 and 2 Port T1E1 Multiflex Trunk Voice WAN Interface Cards


http://www.cisco.com/en/US/prod/collateral/routers/ps5855/prod_qas0900aecd8028d2e5.html



Cheers!

Rob


Please support CSC Helps Haiti


https://supportforums.cisco.com/docs/DOC-8895


https://supportforums.cisco.com/docs/DOC-8727

Actions

This Discussion