06-03-2010 03:38 PM - edited 03-11-2019 10:54 AM
Hello Community;
When users are VPN connected their telnet sessions timeout after an hour of inactivity. Looking at the connections on the firewall they are showing as idle. Is there a configuration change or something else that has to be modified?
Any help will be greatly appreciated?
Thank You
06-03-2010 03:54 PM
Hi,
The tunnel never goes down? Is just telnet after an hour?
If the telnet connection is to the ASA itself, check the command: sh run telnet (telnet timeout 60)
If it's telnet to an inside device, check the command: sh run timeout
It might show you the connection timeout set to 1 hour.
Hope it helps.
Federico.
02-27-2012 04:51 AM
Hi,
You can use following to configure/change the default timeouts of tcp connections going through ASA (which is 1 hour).
Regards,
Devendra
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: