06-04-2010 09:04 PM - edited 03-15-2019 11:06 PM
Hi folks,
Im looking for a config exemple of how setup the cue 3.1 to support imap.
tks.
06-05-2010 07:49 AM
I believe the answer to your question is laid out in the following configuration guide:
Follow this procedure to configure the Integrated Messaging capability.
The system must have a default security certificate and private key installed before SSL connections are permitted on Cisco Unity Express. Use the show crypto key command to display the system default certificate-key pair. If no default pair exists, follow the procedure in "Configuring Security" on page 295.
Name of a subscriber group that has the vm-imap privilege.
1. config t
2. service imap
3. enable
4. maxsessions num-sessions
5. session idletimeout minutes
6. session security {ssl | none | mixed | keyLabel labelname}
7. enable
8. no enable
HTH.
Regards,
Bill
Please remember to rate helpful posts.
Please remember to rate helpful responses and identify
06-06-2010 03:51 PM
Hello William,
tks for the answer,
im looking for a sh run sample config. Also if you have a screen shoot in outlook how to setup the mail accompt.
tks all
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide