06-05-2010 12:26 AM - edited 03-04-2019 08:41 AM
Hi all,
I have Cisco 3750-24PS-S switch, which IOS mistakenly erase, I have run switch:format flash: command also,
I tried Xmodem recovery for upload IOS on flash, but it gives I/O error while uploading the IOS,
So plz give the complete procedure for IOS recovery through HyperTerminal OR any another method/
also attached is a snapshot of that error,
Regards,
Vaibhav S.
06-05-2010 04:34 PM
Kindly enter the following commands first:
init_switch
load_helper
06-07-2010 08:06 AM
Please try the following steps to disaster recovery.
Do check the connections before proceeding:
flash_init
load_helper
dir flash:
set baud 115200 --> for faster transfer please change the baud rate
copy xmodem:flash:
More details provided in the following link:
http://www.cisco.com/en/US/products/hw/switches/ps628/products_tech_note09186a0080169696.shtml
More details of the error message can be found in error decoder in cisco.com site:
Hope it helps!
Regards,
podhillo
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide