Reg. routing issue

Answered Question
Jun 5th, 2010
User Badges:

Hi halijenn / pkampana / all


I have an issue where there are overlapping networks at inside and outside of ASA hence is it possible in the ASA that i can segregate the traffic by means of routing or NATTING ?


(192.168.16.0) Router (at WAN Branch) -----Switch ---(Outside)ASA(Inside)----Switch ----Router1----Router2 (192.168.16.0)

Correct Answer by Kureli Sankar about 6 years 9 months ago

Ankur,

I had answered a similar thread a while ago. Spent quite a bit of time coming up with the lines that he needed. Unfortunately he decided not to implement.

You can read here: https://supportforums.cisco.com/message/3046434#3046434


Refer this link: http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/nat_static.html#wp1082664


-KS

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Kureli Sankar Sun, 06/06/2010 - 04:21
User Badges:
  • Cisco Employee,

Ankur,

I had answered a similar thread a while ago. Spent quite a bit of time coming up with the lines that he needed. Unfortunately he decided not to implement.

You can read here: https://supportforums.cisco.com/message/3046434#3046434


Refer this link: http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/nat_static.html#wp1082664


-KS

Actions

This Discussion