06-05-2010 10:11 PM - edited 03-21-2019 02:39 AM
I have five 7975G's, one 7925G and a SPA on my UC-540.
I want the 7975G's to turn on at 8:30AM and off at 5:30PM, Monday through Friday.
I want the 7975G backlight to come on when used outside those hours for 10 minutes.
Finally, when the backlight is idle and a new call comes in, the baclight should stay on for 10 minutes. I think the default behaivor is teh phone does not light up, but im not sure.
Here is what I think I need;
service phone daysBacklightNotActive 1,7
service phone backlightOnTime 08:30
service phone backlightOnDuration 09:00
service phone backlightIdleTimeout 00:15
service phone displayOnWhenIncomingCall 10
create cnf-files
reset all
When I try this, it does not work. I think its because I am not applying the changes to the 7975G phones explicitly.
Can anyone tell me how to do that or what I am doing wrong?
On a side note, its pretty silly that Cisco shows these settigns int he phone's GUI, but denies the ability to make changes.
Thanks,
06-10-2010 07:11 AM
Hi Brook,
I'm going through a similar issue right now and I think I found the solution --
First, create an ephone-template that has all the parameters you need:
ephone-template 10
service phone daysBacklightNotActive 1,7
service phone backlightOnTime 08:30
service phone backlightOnDuration 09:00
service phone backlightIdleTimeout 00:15
service phone displayOnWhenIncomingCall 10
Then apply the ephone-template to the ephone's:
ephone xx
ephone-template 5
Then regenerate the cnf files and reset the phones:
no create cnf
create cnf
reset all
I believe that should work, but if not, hopefully it'll put you in the right direction. Please be sure and post the results.
Regards,
Brandon
06-10-2010 07:18 AM
I'll try it tonight and advise.
Thanks!
06-10-2010 08:08 AM
I just realized my examples used different template tag #'s -- just make sure you use the same tags when you implement.
ephone-template 10
service ...
ephone xx
ephone-template 10
06-11-2010 07:12 AM
Brandon,
I'll give it a try and advise the resutls.
ephone-template 10
service phone daysBacklightNotActive 1,7
service phone backlightOnTime 08:30
service phone backlightOnDuration 09:00
service phone backlightIdleTimeout 00:15
service phone displayOnWhenIncomingCall 10
Then apply the ephone-template to the ephone's:
ephone xx
ephone-template 10
Then regenerate the cnf files and reset the phones:
no create cnf
create cnf
reset all
Thanks,
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: