SCE - Subscriber Manager /32 only!!

Mohammed Said Ahmed · ‎06-06-2010

Hi,

I am deploying a service control solution for an enterprise that want to monitor and control the bandwidth utilization. The solution contains a SCE, CM, SM, MySQL DB and Console SCA BB machine. I need to develop usage reports per subnet. I tried to create a subscriber for each subnet. I was surprised to find that from the SCA BB console subscriber manager GUI tool, I can only add subscribers with /32 mask IP addresses. All the documentation tells that I can map an IP range (for example 10.1.0.0/16) to a subscriber ID. If I did so, the subscriber is not created in the SM database. The only way for me to add a subscriber to the SM database is to make it /32 host address.

Anyhelp with this? I need to develop reports per subnet.

Kind Regards

Mohamed Saeed

CCIE # 17359

siska-syka · ‎06-09-2010

Hi Mohamed!

You must adjus parametr "support_ip_ranges=yes" in p2sm.cfg file
http://www.cisco.com/en/US/docs/cable/serv_exch/serv_control/broadband_app/rel36x/smug/Configuration_File_Options.html#wp1049154

Best regargs,

Mike

Mohammed Said Ahmed · ‎06-28-2010

Hi Mike,

Thanks for the help, it solved the issue.

Kind Regards

Mohamed