06-06-2010 01:59 PM - edited 03-11-2019 10:55 AM
Hi,
Admins are no longer able to initiate FTP from the Inside network to the same servers at the Outside network, once upgraded FWSM from 1.x to 4.0.x.
FTP inspection in the policy map is there, as you know it is the default config.
Appreciate your expertise, where could be the problem. Definite, the last thing I would do is taking your advise to roll back
Thanks
Sam
06-07-2010 05:55 PM
By no means should you downgrade to 1.x.
FWSM 4.0 had no major issues with FTP.
I would suggest collecting "debug ftp" logs and captures on the FWSM in and out interfaces to track it down further. Also syslogs could give some insight.
PK
06-07-2010 11:20 PM
Thanks PK. I did found the problem and fixed it, yesterday but forgot to update my posting. The problem was in class-map configuration, there was match statement.
Appreciate your try to help.
Sami
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: