cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3329
Views
0
Helpful
7
Replies

asdm upgrade from 6.2(5)53 to "asdm-631.bin"

jamal_ayach
Level 1
Level 1

Trying to upgrade asdm. I get this message when setting the asdm image command:

Device Manager image set, but not a valid image file disk0:/asdm-631.bin

I know that some feature aren't available under 8.3 with 512MB. Is this one of them ?

Equipment: asa 5520

Current running:

Cisco Adaptive Security Appliance Software Version 8.3(1)
Device Manager Version 6.2(5)53

Compiled on Thu 04-Mar-10 16:56 by builders
System image file is "disk0:/asa831-k8.bin"
Config file at boot was "startup-config"

Hardware:   ASA5520, 512 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW080 @ 0xfff00000, 1024KB

1 Accepted Solution

Accepted Solutions

What is wrong with this picture:-

--#--  --length--       -----date/time------            -----path-----

  180  17199         Jun 07 2010 10:30:06       asdm-631.bin
  134  11491880    Jun 07 2010 09:53:42       asdm-623.bin

Your 631.bin file is an incomplete image file.

HTH>

View solution in original post

7 Replies 7

andrew.prince
Level 10
Level 10

You need to make sure of the below:-

1) You have the image file "asdm-631.bin

2) The image is in the flash on the ASA.

See the below

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008067e9f9.shtml

HTH>

1) I have the file

2) image is on flash.

Followed instructions on that link. Still no results.

Now i'm back to 6.2.3

what is the output of "show flash"

show flash:

--#--  --length--  -----date/time------  path

   12  4096        Dec 31 2002 19:06:22  coredumpinfo
   13  43          Dec 31 2002 19:06:22  coredumpinfo/coredump.cfg
  180  17199       Jun 07 2010 10:30:06  asdm-631.bin
    3  4096        Mar 09 2009 09:26:34  log
    6  4096        Mar 09 2009 09:26:46  crypto_archive
  129  15943680    Jun 06 2010 20:43:10  asa831-k8.bin
  130  4863904     Mar 09 2009 09:30:02  securedesktop_asa_3_3_0_129.pkg.zip
  131  4096        Mar 09 2009 09:30:02  sdesktop
  175  1462        Mar 09 2009 09:30:02  sdesktop/data.xml
  132  2153936     Mar 09 2009 09:30:04  anyconnect-win-2.2.0133-k9.pkg
  134  11491880    Jun 07 2010 09:53:42  asdm-623.bin
  136  3756345     Mar 09 2009 09:30:10  anyconnect-linux-2.2.0133-k9.pkg

255844352 bytes total (215703552 bytes free)

What is wrong with this picture:-

--#--  --length--       -----date/time------            -----path-----

  180  17199         Jun 07 2010 10:30:06       asdm-631.bin
  134  11491880    Jun 07 2010 09:53:42       asdm-623.bin

Your 631.bin file is an incomplete image file.

HTH>

re-downloaded the file with and without the download manager. Finally got all the file! Thanks!

np - glad to help.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: