06-07-2010 05:54 PM - last edited on 03-25-2019 07:59 PM by ciscomoderator
Configuring a new 2801 ISR running Version 12.4(15)T10 IOS & Version 4.1(0) CME.
I'm trying to add a 7925 Wireless IP Phone. I downloaded the CP7925G-1.3.4SR1.tar which is supposed to be the latest 'Skinny Client Control Protocol (SCCP) Software' and according to the " ... Release Notes with the Cisco Unified Wireless IP Phone running with Cisco Unified Communications Manager 6.0 and later, and Cisco Unified CallManager 5.1, 4.3, 4.2, and 4.1. "
When I import the files using 'archive tar /xtract tftp://172.16.1.11/CP7925G-1.3.4SR1.tar flash:' The files import to a folder flash:/P7925G-1.3.4SR1. but I can't get the system to recognize them.
I deleted them and repeated the import using CCP 2.2. Again the files imported to the folder but still they are not recognized.
Help!
06-07-2010 06:10 PM
It does not appear that the 7925 is compatible with CME 4.1. First compatibility matrix that shows the 7925 is for CME 4.3:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme43spc.htm
HTH.
Regards,
Bill
Please remember to rate helpful responses and identify
06-07-2010 06:33 PM
Will,
You are completely rigth, he needs al least CME 4.3 to use the 7925 wireless IP phone.
HTH
Please rate this post if was helpful
Walter Solano
Cisco UCCX Specialist
06-07-2010 06:36 PM
Bill is right on the spot, read the doc:
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: