cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
673
Views
0
Helpful
2
Replies

Aironet 1400

Alizuno04
Level 1
Level 1

Hi,

Help, please.

We have tree aironet 1400.

Show command:

antenna 1:

ROM: Bootstrap program is c1410 boot loader

BOOTLDR: C1410 Boot loader (C1410-BOOT-M) Version 12.3(2)JA4, RELEASE SOFTWARE (fc1)

...

...

System image file is "flash:/c1410-k9w7-mx.123-8.JEA2/c1410-k9w7-mx.123-8.JEA2"

antenna 2:

ROM: Bootstrap program is c1410 boot loader

BOOTLDR: C1410 Boot  loader (C1410-BOOT-M) Version 12.3(2)JA4, RELEASE SOFTWARE (fc1)

...

...

System  image file is  "flash:/c1410-k9w7-mx.123-8.JEA2/c1410-k9w7-mx.123-8.JEA2"

antenna 3

ROM: Bootstrap program is c1410 boot loader

BOOTLDR: C1410 Boot  loader (C1410-BOOT-M) Version 12.3(2)JA3, RELEASE SOFTWARE (fc2)

...

...

System  image file is  "flash:/c1410-k9w7-mx.123-8.JEA2/c1410-k9w7-mx.123-8.JEA2"

Every 8-10 minuttes before lost the connection (about one minute) -- In the event log: Interface Dot11 Radio0, Associated to ... [None WPA PSK]

After itself reconnect and work ok for  8-10 min.

How can we copy the same bootloader version to the antenna 3 or is another one the cause of this problem?

Regards,

Alexis Lara

I am thinking that this is the problem

2 Replies 2

Leo Laohoo
Hall of Fame
Hall of Fame

It ain't the bootloader/bootstrap that's the problem.  Have you tried upgrading the IOS?

Thanks leolaohoo,

I have reseted twice and used this command for download this image:

AP#archive download-sw /reload /leave-old-sw tftp://n.n.n.n/c1410-k9w7-tar.123-8.JEA2.tar
AP#wr
AP#reload

The rest of the antennas work ok.

Regards.

Review Cisco Networking products for a $25 gift card