06-08-2010 12:18 PM - edited 03-21-2019 02:40 AM
Hi, is it possible to connect a vg204 to UC520?
The old ATA should be supported, but want about vg202 and vg204. Have anyone done it and can they give som e hints?
Thomas
07-27-2010 01:22 PM
Found the solution
hostname VG204
!stcapp ccm-group 1stcapp!stcapp feature access-code!stcapp feature speed-dial!voice-card 0!interface FastEthernet0/0 ip address 192.168.10.2 255.255.255.0 duplex auto speed auto!ip route 0.0.0.0 0.0.0.0 192.168.10.1!voice-port 0/0 timeouts ringing infinity!voice-port 0/1 timeouts ringing infinity!voice-port 0/2 timeouts ringing infinity! voice-port 0/3 timeouts ringing infinity!ccm-manager fax protocol ciscoccm-manager sccp local FastEthernet0/0!mgcp fax t38 ecmmgcp behavior g729-variants static-pt!sccp local FastEthernet0/0sccp ccm 192.168.10.1 identifier 1 version 7.0 sccp!sccp ccm group 1 associate ccm 1 priority 1 registration retries 1 registration timeout 1 keepalive retries 1 keepalive timeout 3 connect retries 1 connect interval 3!! dial-peer voice 24 pots service stcapp port 0/0!dial-peer voice 2 pots service stcapp port 0/1!dial-peer voice 3 pots service stcapp port 0/2!dial-peer voice 4 pots service stcapp port 0/3!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community