06-08-2010 03:19 PM - edited 03-13-2019 07:00 PM
I am trying to get DMM software installed on an HP DL380G5 that is the equivalent build of an MCS7835. I need to get the configuration work started while I am waiting for the customer's gear to ship. The DMM software comes up and says it is not supported hardware. Does anyone know of a way to get the software to load on this server?
Solved! Go to Solution.
06-08-2010 04:42 PM
I am sorry. Software installed on an unsupported platform is not allowed.
In fact, the DMS Products such as the Digital Media Manager & Show and Share
are "appliances". The software in already installed on the server unless it is an
upgrade to a previous version.
If you have a demo version of VMware images obtained from Cisco, those images
should run fine in a VMware environment on the HP Servers.
For additional assistance, You should contact your local Cisco Account Team or
Sales Rep.
Cheers!
T.
06-10-2010 05:37 AM
Since this thread is completed, Please take time to mark this discussion answered & rate the response. Thank You! T.
06-08-2010 04:42 PM
I am sorry. Software installed on an unsupported platform is not allowed.
In fact, the DMS Products such as the Digital Media Manager & Show and Share
are "appliances". The software in already installed on the server unless it is an
upgrade to a previous version.
If you have a demo version of VMware images obtained from Cisco, those images
should run fine in a VMware environment on the HP Servers.
For additional assistance, You should contact your local Cisco Account Team or
Sales Rep.
Cheers!
T.
06-08-2010 06:23 PM
Thanks for your reply.
06-10-2010 05:37 AM
Since this thread is completed, Please take time to mark this discussion answered & rate the response. Thank You! T.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide