06-09-2010 07:33 AM - edited 03-06-2019 11:30 AM
Hello
on 4500 catalyst switch I get error on two ports.
show int gigabitEthernet 4/22
GigabitEthernet4/22 is down, line protocol is down (notconnect)
show int gigabitEthernet 4/13
GigabitEthernet4/13 is up, line protocol is up (faulty)
rest all ports are working.
I changed and tested all speed and duplex options. ( tested Speed 10, 100, auto as well )
I changed the cable ( checked with Cat 5 and Cat 6 cables )
I changed laptops to check the ports 4/22 and 4.13
Changed the ports settings to default
shut / no shut
Any Help !!!
Thanks
Saquib
Solved! Go to Solution.
06-10-2010 08:10 AM
Hello Saquib,
as TJ has noted the linecard is flagged faulty meaning that is not considered fully operational
attempt to extract and to insert it again in a maintanance window
Hope to help
Giuseppe
06-09-2010 10:18 AM
Has this issue about 3 weeks ago. Pull and reset the blade in the chassis, then call TAC to get a new blade as it will go faulty again, but who knows when.
Thanks,
TJM
HTH
06-09-2010 12:38 PM
Thanks.
Any more input from Gurus'
06-09-2010 01:54 PM
Hello Saquib,
post sh module and sh ver | inc image
I would consider to do what TJ has suggested to reseat the linecard.
Also checking the linecard test results at power on can be a wise step
Hope to help
Giuseppe
06-10-2010 07:55 AM
Hi
here is the details
System image file is "bootflash:cat4000-i9k2s-mz.121-19.EW1.bin"
show module
Chassis Type : WS-C4506
Power consumed by backplane : 10 Watts
Mod Ports Card Type Model
---+-----+--------------------------------------+------------------+-----------
1 2 1000BaseX (GBIC) Supervisor(active) WS-X4515
2 24 10/100/1000BaseTX (RJ45) WS-X4424-GB-RJ45
M MAC addresses Hw Fw Sw Status
--+--------------------------------+---+------------+----------------+---------
1 1 3.1 12.1(20r)EW1 12.1(19)EW1, EAR Ok
2 001 Faulty
06-10-2010 08:08 AM
That is exactly what my show module looked like with the faulty flag set.
Thanks,
TJM
06-10-2010 08:10 AM
Hello Saquib,
as TJ has noted the linecard is flagged faulty meaning that is not considered fully operational
attempt to extract and to insert it again in a maintanance window
Hope to help
Giuseppe
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide