modem inout - for AUX ?

Unanswered Question
Jun 9th, 2010
User Badges:

Hi All


We are standardizing on AUX port configurations for thousands of end routers.. The understanding that Im in is - incoming calls to modems on AUX port would work only if we have the "modem inout" command on the line aux.. Is that right ? My questions:


1) would the aux port on a router work without the modem inout command ? Do new versions of code have this enabled default ? (this is because i heard from my counterparts that they were able to dial without this command) ...


2) If the above is true, what are the other ways that we can identify - "show line" shows, but through CLI commands is it possible ? because we are running compliance throgh NCM now, and NCM just checks command sets / CLI , and not show outputs...


Thanks in advance

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
Loading.
francisco_1 Wed, 06/09/2010 - 08:24
User Badges:
  • Gold, 750 points or more

My understanding is the modem inout command  allows inbound & outbound calls on the modem


Francisco

sblavanya Wed, 06/09/2010 - 08:42
User Badges:

Ya Francisco.. So would you say AUX port will not work without that command ? we are mainly focussing on inbound dialing, and not outbound..

Actions

This Discussion